Silverline Ear Plugs SNR 37dB User Manual download pdf

Ear Plugs

Product Code 675240

GENERAL SAFETY INSTRUCTIONS

It is important to read and understand your instruction

manual and any label attached to the tool. Learn its

application, as well as it’s limitations and the potential

hazards associated with this power tool.

Earth all tools

• Where the tool is supplied with a 3 core

cable. Always connect the green and yellow

to the earth terminal never connect it to a live

terminal.

Keep guards in position

• Always keep guards in position, in good

working order, correctly adjusted and

aligned. Never attempt to use a power tool

without any guard supplied with it.

Remove adjusting keys

• Always check to see that keys and adjusting

wrenches are removed from power tool

before turning on.

Clean work area

• Accidents occur where benches and work

areas are cluttered or dirty, ﬂoors must be

kept clear, avoid working where the ﬂoor is

slippery due to sawdust or wax.

Dangerous environment

• Do not use power tools in damp or wet

conditions, or expose them to rain. Provide

adequate surrounding work space and keep

area well lit.

Children

• Children should always be kept at a safe

distance from your work. Make your

workshop child-proof. Lock tools away where

children can not get access to them.

Do not use excess force.

• Your power tool will give you much better

service if you do not use excessive force

when using it.

Use the correct power tool

• Do not force, or attempt to use a power tool

for a purpose it was not designed for.

Wear correct clothing

• Do not wear loose clothing, neckties or

jewellery or other items which may get

caught in moving parts. Wear non-slip

footwear, cover or tie back long hair, roll long

sleeves above the elbow.

Protect your head

• Wear safety goggles at all times, every day

glasses are not sufﬁcient for eye protection,

as lenses are not impact resistant and could

shatter. Use face or dust mask if

operation is likely to be dusty and ear

protectors during extended periods of

operation.

Secure work

• Always secure work where practical, use a

clamp or vice, it will allow you to use both

hands to operate your power tool.

Keep your balance

• Do not over reach, keep proper footing at all

times to ensure correct balance.

Maintain your tool

• Keep your tool in good working order,

keep tools sharp and clean for best and

safest performance. Follow instructions for

changing accessories and lubrication.

Accessories

• Follow the instructions that accompany

the accessories. The use of improper

accessories could be dangerous.

Never stand on your power tool

• Standing on your power tool or its stand

could cause serious injury if the tool is tipped

or if the cutting tool is accidentally contacted.

Do not store materials above or near the tool

so that it is necessary to stand on the tool or

its stand to reach them.

Check damaged parts

• If any part of the tool is damaged, before

further use, check carefully that it will operate

properly and perform its intended operation.

Check alignment of moving parts for binding.

Any guard or other part that is damaged

should be correctly repaired or replaced.

Thank you for choosing this product.

Silverline Tools Ltd. guarantees this product to be free of defects in material & workmanship forever. Any defective

product returned, with original receipt, will be repaired, replaced or refunded at our discretion. We do not refund

carriage. This guarantee does not cover damage caused by abuse, misuse, modiﬁcation, accident or fair wear &

tear. Your statutory rights are not affected.

If you experience a problem, return the product direct to us, with the original receipt at :

Silverline Tools Limited.

PO Box 2988,

Yeovil.

BA21 1WU

We do not refund carriage. This guarantee is for Great Britain only and does not affect your

statutory rights. As you would expect fair wear and tear are not covered.

Product

Familiarisation

Ear Plugs

SPECIFICATION

Attenuation values

EN ISO 4869-2 HML value: H=36 M=34 L=33

EN ISO 4869-2 SNR-value: SNR 37dB

WARNING

• Improper ﬁt of this device will reduce its effectiveness to

reduce noise levels.

• Follow these instructions for proper ﬁt.

• Ear Plugs can be recommended for protection against

the harmful effects of impulsive noise. The Standard

Noise Reduction (SNR) is based on the attenuation of

continuous noise and may not be an accurate indicator

of the protection attainable against impulsive noise such

as gunﬁre. Constant or repetitive exposure to impulsive

noise may lead to serious injury, temporary or

permanent deafness.

• These ear plugs, whilst designed to protect ears from

injury, do not provide unlimited protection.

• These ear plugs are single use, discard after use ensure

the plugs are not accessible to children.

Frequency Hz

125 250 500 1000 2000 4000 8000

Mean

Attenuation (dB)

38.1 37.9 39.6 37.7 37.3 48.4 45.9

Standard

Deviation (dB)

4.9 6.3 6.5 4.2 3.5 5.1 4.5

Assumed

Protection Value

(dB)

33.2 31.6 33.1 33.5 33.8 43.3 41.4

Tested according to EN352-1:2002

OPERATING INSTRUCTIONS

Operating Instructions

• Roll the ear plugs between the ﬁngers to soften and

expel air.

• Carefully place into the ear canal. To help open the ear

canal reach over your head with one hand and pull the

ear upward to open the canal.

• Hold in place until ear plug has expanded to ﬁt and

sealed the ear canal.

• These ear plugs are single use, discard after use to

ensure the plugs are not accessible to children.

Summary of Contents

Page 1 - Ear Plugs

Ear PlugsProduct Code 675240© July 2006GENERAL SAFETY INSTRUCTIONSIt is important to read and understand your instruction manual and any label attache

Comments to this Manuals

No comments

Silverline Ear Plugs SNR 37dB User Manual

Browse online or download User Manual for Safety Silverline Ear Plugs SNR 37dB. Silverline Ear Plugs SNR 37dB User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Silverline Ear Plugs SNR 37dB