Silverline 400W Clean Water Pump User Manual download pdf (Page 5)

Carefully read and understand this manual and any label attached to

the tool before use. Keep these instructions with the product for future

reference. Ensure all persons who use this product are fully acquainted

with this manual.

Even when used as prescribed it is not possible to eliminate all residual risk

factors. Use with caution. If you are at all unsure of the correct and safe

manner in which to use this tool, do not attempt to use it.

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric shock, ﬁre and/

or serious injury.

WARNING: This appliance is not intended for use by persons (including

children) with reduced, physical or mental capabilities or lack of experience

or knowledge unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children must be supervised to ensure that they do not play with the

appliance.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

a) Keep work area clean and well lit. Cluttered or dark areas invite

accidents

b) Do not operate power tools in explosive atmospheres, such as

in the presence of ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control

Electrical Safety

a) Power tool plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with earthed (grounded)

power tools. Unmodiﬁed plugs and matching outlets will reduce risk

of electric shock

b) Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the

risk of electric shock

e) When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock

f) If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply. Use of an RCD

reduces the risk of electric shock

WARNING: When used in Australia or New Zealand, it is recommended

that this tool is ALWAYS supplied via Residual Current Device (RCD)

with a rated residual current of 30mA or less.

Personal Safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while you

are tired or under the inﬂuence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in

serious personal injury

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries

Description of Symbols

The rating plate on your tool may show symbols. These represent important

information about the product or instructions on its use.

Wear hearing protection

Wear eye protection

Wear breathing protection

Wear head protection

Wear hand protection

Read instruction manual

Class I construction (protective earth)

Risk of electrocution!

Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of with

household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

Speciﬁcation

Voltage: .................................................................... 220-240V~, 50Hz

Power: ..................................................................... 400W

No load speed: ......................................................... 2860min

-1

Max ﬂow rate: .......................................................... 150L/min

Maximum head height: ............................................ 8m

Minimum water level: .............................................. 40mm

Maximum submersion depth:. ................................. 8m

Maximum particle size:. ........................................... 5mm

Maximum water temp:............................................. 35˚C

Output hose connection: .......................................... 19-32mm

(

⁄4"-1-

⁄4")

Cable length: ............................................................ 10m

Ingress protection: ................................................... IPX8

Protection class: ......................................................

Weight: .................................................................... 4.5kg

As part of our ongoing product development, speciﬁcations of Silverline products may

alter without notice.

262231_Z1MANPRO1.indd 4 16/09/2013 15:03

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments

Silverline 400W Clean Water Pump User Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Silverline 400W Clean Water Pump